Previously, I’ve blogged about the VN2VN (virtual node to virtual node) technology coming with the new T11-FC-BB6 specification. In a nutshell, VN2VN enables an “all Ethernet” FCoE network, eliminating the requirement for an expensive Fibre Channel Forwarding (FCF) enabled switch. VN2VN dramatically lowers the barrier of entry for deploying FCoE. Host software is available to support VN2VN, but so far only one major SAN vendor supports VN2VN today. The ecosystem is coming, but are there more immediate alternatives for deploying FCoE without an FCF-enabled switch or VN2VN-enabled target SANs? The answer is that full FC-BB5 FCF services could be provided … Read the rest

Our VN2VN Webcast last week was extremely well received. The audience was big and highly engaged. Here is a summary of the questions attendees asked and answers from my colleague, Joe White, and me. If you missed the Webcast, it’s now available on demand.

Question #1:

We are an extremely large FC shop with well over 50K native FC ports. We are looking to bridge this to the FCoE environment for the future. What does VN2VN buy the larger company? Seems like SMB is a much better target for this.

Answer #1: It’s true that for large port count SAN … Read the rest

Seamus Crehan, President, Crehan Research Inc.

2H12 results

2012 turned out be another very strong growth year for 10 Gigabit Ethernet (10GbE), with the data center switch market and the server-class adapter and LAN-on-Motherboard (LOM) market both growing more than 50%. Broad long-term trends such as virtualization, convergence, data center network traffic growth, cloud deployments, and price declines were helped further by more specific demand drivers, many of which materialized in the latter half of 2012. These included the adoption of Romley servers, expanded 10GBASE-T product offerings for both switches and servers, 10GbE LOM solutions for volume rack servers (which … Read the rest

Storage traffic running over Ethernet-based networks has been around for as long as we have had Ethernet-based networks. Of course sometimes it is technically not accurate to think of the protocols as fundamentally Ethernet protocols – whilst FCoE, by definition, only runs on Ethernet, iSCSI, SMB, and NFS, they are, in reality, IP-based storage protocols and whilst most commonly run on Ethernet, could run on any network that supports IP. That notwithstanding, it is increasingly important to understand the real nature of Ethernet, and in particular, the nature of the new enhancements that we put under the umbrella of Data … Read the rest

A challenge with traditional iSCSI deployments is the non-deterministic nature of Ethernet networks. When Ethernet networks only carried non-storage traffic, lost data packets where not a big issue as they would get retransmitted. However; as we layered storage traffic over Ethernet, lost data packets became a “no no” as storage traffic is not as forgiving as non-storage traffic and data retransmissions introduced I/O delays which are unacceptable to storage traffic. In addition, traditional Ethernet also had no mechanism to assign priorities to classes of I/O.

Therefore a new solution was needed. Short of creating a separate Ethernet network to handle … Read the rest

The completion of a specification for FCoE (T11 FC-BB-5, 2009) held great promise for unifying storage and LAN over a unified Ethernet network, and now we are seeing the benefits. With FCoE, Fibre Channel protocol frames are encapsulated in Ethernet packets. To achieve the high reliability and “lossless” characteristics of Fibre Channel, Ethernet itself has been enhanced by a series of IEEE 802.1 specifications collectively known as Data Center Bridging (DCB). DCB is now widely supported in enterprise-class Ethernet switches. Several major switch vendors also support the capability known as Fibre Channel Forwarding (FCF) which can de-encapsulate /encapsulate the Fibre … Read the rest

For nearly a decade, the primary deployment of 10 Gigabit Ethernet (10GbE) has been using network interface cards (NICs) supporting enhanced Small Form-Factor Pluggable (SFP+) transceivers. The predominant transceivers for 10GbE are Direct Attach (DA) copper, short range optical (10GBASE-SR), and long-range optical (10GBASE-LR). The Direct Attach copper option is the least expensive of the three. However, its adoption has been hampered by two key limitations:

- DA’s range is limited to 7m, and

- because of the SFP+ connector, it is not backward-compatible with existing 1GbE infrastructure using RJ-45 connectors and twisted-pair cabling.

10GBASE-T addresses both of these limitations.… Read the rest

As the migration to 10Gb Ethernet moves forward, many data centers are looking to converge network and storage I/O to fully utilize a ten-fold increase in bandwidth. Industry discussions continue regarding the merits of 10GbE iSCSI and FCoE. Some of the key benefits of both protocols were presented in an iSCSI SIG webcast that included Maziar Tamadon and Jason Blosil on July 19th: Two Storage Trails on the 10Gb Convergence Path

It’s a win-win solution as both technologies offer significant performance improvements and cost savings. The discussion is sure to continue.

Since there wasn’t enough time to respond to all … Read the rest

Are you considering deploying an iSCSI storage network, and would like to learn some of the best practices of configuring the environment, from host to storage? Well, now you can learn from an expert. The SNIA Ethernet Storage Forum will be sponsoring a live webcast with our guest speaker, Dennis Martin from Demartek. Dennis will share first-hand expertise and actionable best practices to effectively deploy iSCSI storage networks. A live Q&A will also be included. It doesn’t matter if you have a large, medium or small environment, Dennis will provide application specific recommendations that you won’t want to miss.

When: … Read the rest

by: Gary Gumanow

Last Wednesday (2/24/11), I hosted an Ethernet Storage Forum iSCSI SIG webinar with representatives from Emulex and NetApp to discuss the benefits of iSCSI storage networks in SQL application environments. You can catch a recording of the webcast on BrightTalk here.

The webinar was well attended, and while we received so many great questions during the webinar we just didn’t have time to answer all of them. Which brings us to this blogpost. We have included answers to these unanswered questions in our blog below.
We’ll be hosting another webinar real soon, so please check back … Read the rest